Stylish racing exhaust with attached muffler suitable for various Puch mopeds / mopeds.
The raw steel exhaust is sealed with heat-resistant clear lacquer. This gives your racing moped an even more radical look. In addition, the tuning muffler also delivers the performance that it promises with its appearance.
The rearmost end of the resonance body is fitted with a screw. Two additional screws with different holes are included in the scope of delivery. Replacing the screws changes the exhaust back pressure and thus the performance of the silencer. This gives you an exhaust for the lower, middle and upper speed range in one!
Ø Flame tube: 28 mm
Ø Flame tube inside: 25 mm
Hole spacing: 43 mm
Fixing hole: 6.2 mm
Total length: 900 mm
Alternative racing tailpipes and the required mounting material can be found under accessories.
Branded product from the Portuguese manufacturer TECNO.
Details
| Manufacturer | TECNO |
| Material | Steel |
| Surface | varnished |
| Color | gray |
| Ø outside | 90 mm |
| Total length | 900 mm |
| Ø Silencer | 60 mm |
| Ø Internal connection | 25 mm |
| Mounting type | Welded lug |
| Ø Flame tube outside | 28 mm |
| Number of fixing points | 2 pcs |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Stud bolts & nuts |
Suitable for the following models
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Ø inside: 27.4 mm · Thickness: 3 mm · Reinforced: No · Ø outlet inside: 28 mm · Place of use: Exhaust · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8.70
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Color: gray · Material: Steel · Surface: raw · Surface: varnished · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Tab · Ø outside: 88 mm · Total length: 900 mm · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 2 pcs
EUR 334.40
Moped fans like you also bought:
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Material: Metal · Material: Rubber · Color: Chrome · Color: black · Ø outside: 61 mm · Total length: 113 mm · Filter type: Grille · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Camouflaged: No · Area of application: Tuning
EUR 15.30
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Material: Rubber · Number of components: 1 pcs · Surface: raw · Ø inside: 17.2 mm · Color: black · Ø outside: 20 mm · Place of use: Carburetor · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.40
swiing nozzle set M4 (50 - 60) Bing 18, Bing 85
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Drive: Slot · Quantity: 11 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
EUR 25.70
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Ø inside: 27.4 mm · Thickness: 3 mm · Reinforced: No · Ø outlet inside: 28 mm · Place of use: Exhaust · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8.70
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø inside: 15 mm · Hole spacing inlet: 36 mm · Ø External connection: 20 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 58.60
Not in stock
Collection only possible with online purchase and appointment.
