Rubber bumper for the 1st generation of the original fork on your Piaggio Ciao P moped / moped.
This protective rubber with 8 mm pin was only installed on very early models.
However, the rubber stud is also suitable for later forks where the drill hole has become larger due to corrosion or the rubber stud with 7 mm stud does not stay perfectly in position.
Price per piece. Two pieces are required to overhaul the fork.
You can find other wear parts for your fork in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 103699
Alternative to the original Piaggio spare part number: 176373
Details
| Total length | 22 mm |
| Width | 16 mm |
| Manufacturer | Made in Italy |
| Material | Rubber |
| Color | black |
| Ø mounting hole | 8 mm |
| Piaggio OEM number | 103699 |
| Alternative version of the Piaggio OEM number | 176373 |
Suitable for the following models
| Piaggio | Ciao - P |
Accessories & related products
swiing® revival fork spring Ø 24 mm reinforced (pair) Inox | Piaggio Ciao P, SC
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: electropolished · Color: Chrome · Ø outside: 24.75 mm · Ø inside: 16.25 mm · Ø wire: 4.25 mm · Total length: 100 mm · Piaggio OEM number: 113124
EUR 32.80
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (known as Nirosta®) · Color: gold · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
EUR 35.10
Not so nice 
Fork repair kit (galvanized springs) | Piaggio Ciao
Material: Plastic · Material: Rubber · Material: Spring steel · Material: Steel · Surface: galvanized (blue) · Surface: powder-coated · Color: black · Color: silver · Ø outside: 27.4 mm · Ø inside: 20 mm · Ø wire: 3.8 mm · Total length: 99 mm
EUR 46.80
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
EUR 11.60
CIF wheel axle set M11x1 x 165 mm front wheel galvanized | Piaggio Ciao, SI, Bravo
Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Surface: galvanized (yellow) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.3 mm · Total length: 165 mm · Thread length: 73 mm · Shank length: 18 mm · Height: 2 mm · Height: 4 mm · Height: 10 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
EUR 17.50
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Bearing type: Bearing ring · Ø mounting frame: 30.05 mm · Height: 10.5 mm · Height: 17 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Thread type: FG25.4 (1" 24G) · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm
EUR 22.20
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 23.40
Lock washer control head / end nut original | Piaggio Ciao
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (yellow) · Area of application: Standard · Color: silver · Number of lobes: 3 pcs · Ø outside: 32.8 mm · Ø inside: 25.5 mm · Thickness: 1.5 mm · Piaggio OEM number: 189305
EUR 3.40
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (known as Nirosta®) · Color: gold · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
EUR 35.10
Collection only possible with online purchase and appointment.
